Tap a thumbnail to view it large
Polypropylene offcuts, regrind, and bales for injection molders and extruders. Color-sorted, contamination-controlled, and MFI-declared per lot so your process stays predictable.
Pricing reflects form, color, and melt-flow specification.
Corporate Pricing Available Upon Request
| Material | Polypropylene (PP) — offcuts, regrind, and bales |
| Forms | Injection offcuts · purgings · regrind flake · baled woven/non-woven |
| MFI | Declared per lot (typically 2–30 g/10 min depending on source) |
| Sorting | Natural (premium) · white · colored/mixed; resin-purity verified |
| Contamination | ≤ 1% other polymers (PE, ABS pulled at sorting); no metals or paper |
| Moisture | ≤ 1% for regrind; ≤ 2% for baled material |
1 × 40ft Container (± 22–24 MT)
Regrind/offcuts in jumbo bags; baled grades stacked floor-loaded.
100–300 MT per month across forms.
Laem Chabang · FOB / CFR / CIF · SGS / BV inspection on request.
Yes — every lot ships with a declared MFI range based on source resin and spot testing. That matters because PP processing windows are MFI-sensitive, and surprises here cause production stops.
Injection molders usually take regrind or clean offcuts for direct regrind-into-press use; extruders and compounders often prefer bales they can wash and granulate themselves for better margin.
Source-controlled intake plus hand-sorting and float/sink spot checks where needed. PP and PE look similar, so we verify at intake rather than hoping — holding other-polymer contamination at ≤ 1%.